Tips For Air Conditioning Service

If your AC is not working properly and your home is experiencing discomfort, it’s time to check. A service for air conditioning includes maintenance, tune-up, inspection, and tuning up. The technician will review your system and make recommendations to improve its performance. In many ways, the performance of your AC is a good indicator of whether or not you need to have regular maintenance. There are many ways to maintain your AC’s performance.

Cleaning of condensate drain

During an raleigh air conditioning service, cleaning of condensate drain should be done to eliminate any buildup. To remove the debris, a shop vacuum can be used or a wet-vac. You can also use a plumber’s nipper to clean out the drain. The cleaner should check the drain for a blockage before proceeding further. Once the cleaning is completed, the technician should turn off power to the system. The technician should then inspect the drain line to see if there are any signs of stagnant waters. Water that is too dirty will smell unpleasant. The drain should be cleaned by a professional to prevent mold growth.

A clogged condensate drain can cause water leaks in your home. This can be difficult to distinguish from a leaky roof or plumbing. Water damage to the mechanical equipment or drywall can occur if the condensate drain pan overflows. Additionally, a clogged drain pipe will reduce the efficiency of the AC system. A blocked drain pan can also cause a foul odor, which can be very unpleasant for your family.

Check for leaks

Leaks can be a problem for air conditioners, so it is always a good idea to check them before recharging. It would be a waste of time and money to recharge the air conditioning system only to find out that it has leaks. Fortunately, there are several ways to detect leaks in air conditioning systems. Learn how you can spot them and prevent their occurrence. Here are some tips.

Check the evaporator coil to find leaks in your air conditioner. This part cools the AC by collecting heat and moisture. This moisture then flows out the drain to the outdoors. The moisture can’t flow down the drain if the drain line is blocked with dirt or mold. Leakage can occur in the house when the drain pipe becomes blocked. In most cases, the leak will be small, but it is enough to cause the system to fail.

Clean the evaporator coil

Cleaning the evaporator is a key step in air conditioning maintenance. The coil is located in the indoor handling unit. Access is via an access panel. Turn off your thermostat and remove the access panels to clean it. Use a small compressor and shop vac to clean it. You can blow the dust and dirt from the evaporator coil with compressed air.

A foaming evaporator coil cleaner can be purchased and used to clean the coil. The foam will lift dirt and debris off the coil and drain into a condensate drain. You may have to repeat the cleaning process if there is too much buildup. Using a brush will also give you a better view. You can also apply bleach to the coil.

Cleaning condenser fan

To ensure the cooling system is running efficiently, you should clean the condenser fan between air conditioning service. Dirty or clogged condenser fans can cause cooling system to work less efficiently and increase energy costs. Regular cleaning can help reduce the risk of damaging your compressor. A technician will inspect the fan for wear and damage, and clean the coils and grate with compressed air or a soft brush.

The condenser’s fins can become bent or damaged by cleaning. A fin-straightening instrument can be used to straighten the fins. After cleaning out the condenser fan, place it back in its place and switch the electrical disconnect on. Listen for ticks or pings in order to confirm that the fan is functioning properly. If the condenser fan is not spinning properly, it may be an indicator of a more severe problem.

Checking refrigerant levels

Your air conditioning system’s refrigerant component is crucial. Low refrigerant levels can cause problems with your air conditioning system. Low levels can also pose a safety risk. It is important to have your AC serviced on a regular basis to avoid this problem. Fortunately, many HVAC technicians can check the levels using ultra-precise digital gauges. Checking the level before your AC starts cooling will ensure that it is running efficiently.

Low refrigerant may cause warm air to escape from the vents. Sometimes, it could be due to clogged filters or a broken compressor. If you are unsure of the refrigerant level, you can check it yourself. You don’t need to hire a professional for air conditioning services.